EPAX 1kg High Temperature Resin - for 3D printing - mSLA/DLP 3D printers 405nm

EPAX High Temperature Resin
> Can withstand up to 220C
> Exceptional thermal deflection for prints that will be exposed to heat without causing deformation
> Provides sharp details

Color: Grey

Technical Specifications
Viscosity (25C): 350-500MPas
Density: 1.05-1.25g/cm3
Flexural Modulus: 1.882-2.385 MPa
Flexural Strength: 60-72 MPa
Heat Distortion Temperature: 160C
Heat Expansion: 97*E-6
Volume Shrinkage: 3.72-4.24%
Linear Shrinkage Rate: 1.05-1.35%
Tensile Strength: 42-62MPa
Tensile Modulus: 1.86-2.645MPa
Elongation at Break: 11-20%
Hardness: 85-90D
Glass Transition Temperature: 168C
Density after curing: 1.09-1.18g/cm3
Notched Impact Strength: 44-48J/m2
Wavelength: 380-405nm