[CLEARANCE] EPAX Hard and Tough Resin - ABS like 3D Printing Resin Oct 12, 2024 expiry

EPAX Hard and Tough Resin

✨ ABS-like
✨ Compatible to most LCD printers using 405 nm wavelength light
✨ Hardness Shore 81D,
✨ Low Shrinkage
✨ Low Odor

> Hardness: 68 to 78 D
> Curing wavelength: 405 nm
> Tensile strength: 30 to 48 Mpa
> Heat Distortion Temp: 75oC
> Shrinkage: 1.05 to 1.35%

👍 Compatible with Anycubic, Creality, Elegoo, Phrozen, Peopoly and other resin printer brands
Also including Creality LD002H, EPAX, and Peopoly mSLA printers

✔️ Shake well before use
✔️Wear a gloves and mask for safety
✔️ Store at 15-35 ℃ in a cool, dry place. Keep away from direct sunlight to avoid unwanted curing
✔️ Seal well after use to avoid contamination

⚠️ Precautions:
This product should not be ingested. Keep away from children. Do not put in your eyes. In case of accidental contact, flush with running water as soon as possible for at least 15 minutes. If skin is irritated, consult a doctor immediately. Always use gloves when handling uncured resin

Also available at Make It 3D:
- Anycubic General Resin
- Anycubic Eco Resin
- Monocure Flex 100
- Monocure TUFF
- EPAX Hard for large format printers
- EPAX Hard and Tough ABS like
- EPAX Dental
- EPAX Jewelry Castable
- EPAX Water Washable

#3DPrinting #3DPrint #3DPrinter #Resin #EPAX #Anycubic #PhotosensitiveResin #Photon #SLA #DLP #3dresin #elegoo #mars #creality #photopolymer